Welcome to the DDMALL forum.
You are currently viewing our boards as a guest which gives you limited access to post questions and access to our other features.
Only registered members may post questions, download the updated firmwares and documents.
Registration is fast, simple and absolutely free so please - Click to REGISTER!
- Posts: 34
- Joined: Mon Dec 23, 2019 8:24 am
1.RTSP multicast allows ED-2K to push streams in a multicast manner. Compare with unicast, the difference is that when there are multiple clients that need to receive streaming media, unicast mode needs to process and push multiple video streams. But multicast mode can copy and push a video stream to multiple clients, which improves the performance of the ED-2K push video stream and greatly reduces the network bandwidth occupancy.
2.How to configure: Enter the ED-2K web control interface, check RTSP in Misc Steam, and select “Multicast” as Enabled, then enter the Multicast IP address (range 22.214.171.124 ~ 126.96.36.199) or use the default value (188.8.131.52), fill in the Multicast Port (range 2000-65531) or use the default value (8540), and click "Apply" after filling in,shown as in Figure 1. Figure 1
3.How to use: After the setting is successful, the ED-2K will push the stream in the form of multicast. The client opens the stream in the same way as the unicast mode. It can be opened by URL1 or URL2. For example: If the IP address of the ED-2K is 192.168.1.251 and the Multicast IP address is set to 184.108.40.206, then you would use URL rtsp: //192.168.1.251: 8554 / live0 or rtsp: //192.168.1.251: 554 / live0 to open the video stream.
4.1 In the latest firmware ED2K-V220.127.116.11,the maximum video bit rate has been increased to 16M，shown as in Figure 2. Figure 2
4.2 When you use RTSP protocol but do not enable Multicast for streaming, you could push 8 video streams to up to 8 clients, but the total bit rate does not exceed 16M. For example, you can push a 16M video stream to one client, or eight 2M video streams to 8 clients.
4.3 When you use RTSP Multicast mode to push stream, you can push video streams to up to 200 clients, each video stream supports a maximum of 16M bit rate, the total bit rate is unlimited
The above is an introduction on how to use the RTSP Multicast. The RTSP Multicast has better performance. We recommend that you use this mode.
- Posts: 8
- Joined: Sun Aug 09, 2020 12:21 pm
- Location: Guatemala
Is there anyway to do that?