Reminder

Welcome to the DDMALL forum.

You are currently viewing our boards as a guest which gives you limited access to post questions and access to our other features.
Only registered members may post questions, download the updated firmwares and documents.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

HEV-4K HDMI Encoder Latest Firmware (V1.1.0.7/ V2.1.0.8)

Find more introduction about HEV-4K here. If you have any questions about HEV-4K, please leave a post here and we will try our best to solve it. Also you can share your solutions and ideas with other users here.
Post Reply
User avatar
DDmallforum
Site Admin
Posts: 34
Joined: Fri Dec 28, 2018 11:19 am

HEV-4K HDMI Encoder Latest Firmware (V1.1.0.7/ V2.1.0.8)

Post by DDmallforum » Wed Mar 18, 2020 5:59 am

Latest Firmware

Dear all,

We would like to let you know that the firmware for the HEV-4K has been updated to Version 1.1.0.7 and Version 2.1.0.8. You can choose to download the below ZIP file or RAR file for the update.


PLEASE NOTE: The V1.X.X.X firmware is only applicable for the encoder that built with V1 hardware chip, while the V2.X.X.X is only applicable for the encoder that built with V2 hardware chip. If the default firmware version of your encoder is V1.X.X.X, this means your encoder is built with a V1 hardware chip. If the default firmware of your encoder is V2.X.X.X, this means your encoder is built with the V2 hardware.


ZIP File (V1)
HEV4K-V1.1.0.7.zip

RAR File (V1)
HEV4K-V1.1.0.7.rar

ZIP File (V2)
HEV4K-V2.1.0.8.zip

RAR File (V2)
HEV4K-V2.1.0.8.rar



Change History (V1)

* Changes made from version 1.1.0.5 to 1.1.0.7
1. Supports SRT streaming protocol
2. Fixed Mac IP address issue


* Changes made from version 1.1.0.3 to 1.1.0.5
1. Optimized the effect of analog audio input, making the sound clearer.
2. Added the MIC Boost mode to optimize the effect of microphone sound.
3. Added RTSP multicast and UDP push stream mode.
4. Added the Reboot, Restore, and Reset buttons to the Web control interface to facilitate your device control.


* Changes made from version 1.1.0.1 to 1.1.0.3
1. Compatible with Blue Iris and Orchid VMS
2. RTSP port customization is available
3. TTL value is adjustable
4. Supports manual bitrate and bitrate control setting
5. Compression profile (Baseline/Main/High) is selectable
6. Key Frame Interval (GOP) is tunable



Change History (V2)

* Changes made from version 2.1.0.5 to version 2.1.0.8
1. Added RTMP live streaming authentication function
2. Supports SRT video streaming protocol
3. Fixed MAC address issue
4. Fixed the compatibility issue with some live streaming platforms


* Changes made from version 2.1.0.4 to version 2.1.0.5
1. Improved compatibility for more streaming platforms
2. Made improvements for YouTube live streaming experience
3. Optimized the effect of analog audio input, making the sound clearer
4. Added the MIC Boost mode to optimize the effect of microphone sound
5. Added RTSP multicast and UDP push stream mode.
6. Added the Reboot, Restore, and Reset buttons to the Web control interface to facilitate your device control.
7. Compatible with Blue Iris and Orchid VMS
8. RTSP port customization is available
9. TTL value is adjustable
10. Supports manual bitrate and bitrate control setting
11. Compression profile (Baseline/Main/High) is selectable
12. Key Frame Interval (GOP) is tunable



Installation Instructions

Step 1: Download the RAR file or the Zip file and extract the content to the same folder. After doing that, you will find a .dat file in the folder.
Step 2: Login to your HEV-4K web user interface and click the System button.
Step 3: Upload the .dat file and then click the Upgrade button.
Step 4: Reboot your encoder to finish installing updates. (Simply turn off and on the power of the encoder)

If you have any questions, please do not hesitate to contact us and we will be in touch with you right away.

Happy streaming! :D

Best regards,
DDMALL Support Team
support@ddmalltech.com
You do not have the required permissions to view the files attached to this post.

LaurieDib
Posts: 3
Joined: Mon Sep 14, 2020 11:30 am
Location: Cyprus
Contact:

HEV 4K HDMI Encoder Latest Firmware V1 1 0 7/ V2 1 0 8

Post by LaurieDib » Sat Sep 19, 2020 10:12 am

What is the 990i latest firm ware version number?

Trying to determine if I need to run the upgrade on my brothers in-laws cameras

Thanks.


The firmware on my 990i is V1303260 M1001 and it appears that is the latest firmware version.
You do not have the required permissions to view the files attached to this post.

LaurieDib
Posts: 3
Joined: Mon Sep 14, 2020 11:30 am
Location: Cyprus
Contact:

Adult enjoyment

Post by LaurieDib » Sat Sep 19, 2020 11:15 pm

What is the 990i latest firm ware version number? Trying to determine if I need to run the upgrade on my brothers in-laws cameras Thanks. The firmware on my 990i is V1303260 M1001 and it appears that is the latest firmware version.

:) .
You do not have the required permissions to view the files attached to this post.

LaurieDib
Posts: 3
Joined: Mon Sep 14, 2020 11:30 am
Location: Cyprus
Contact:

Adult home entertainment

Post by LaurieDib » Sat Sep 19, 2020 11:27 pm

What is the 990i latest firm ware version number? Trying to determine if I need to run the upgrade on my brothers in-laws cameras Thanks. The firmware on my 990i is V1303260 M1001 and it appears that is the latest firmware version.

:) .
You do not have the required permissions to view the files attached to this post.

Post Reply