Reminder

Welcome to the DDMALL forum.

You are currently viewing our boards as a guest which gives you limited access to post questions and access to our other features.
Only registered members may post questions, download the updated firmwares and documents.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

WHE-10 upgrade instructions (WHETX-V1.1.2/WHE10RX-V1.1.4)

DDMALL New Release Wireless HDMI Extender, share your solutions and ideas here with other users.
Post Reply
DDM_Jim
Posts: 67
Joined: Mon Dec 23, 2019 8:24 am

WHE-10 upgrade instructions (WHETX-V1.1.2/WHE10RX-V1.1.4)

Post by DDM_Jim » Mon May 10, 2021 9:35 am

WHE-10 upgrade instructions (WHETX-V1.1.2/WHE10RX-V1.1.4)

Brief description
1.You need to download the upgrade package file to your computer, unzip it and get these three files "WHETX-V1.1.2.dat", "WHE10RX-V1.1.3.dat", "WHE10RX-V1.1.4.dat".
2. WHE-10TX needs to be upgraded from WHETX-V1.1.1 to WHETX-V1.1.2.
3. WHE-10RX needs to be upgraded from WHE10RX-V1.1.2 to WHE10RX-V1.1.3, and then from WHE10RX-V1.1.3 to WHE10RX-V1.1.4.
The following are the specific upgrade steps.

How to upgrade WHE-10TX from WHETX-V1.1.1 to WHETX-V1.1.2.
1.Use Micro USB to power your WHE-10TX, wait 15 seconds for it to fully start up, and then press and hold the set button for 3 seconds, the yellow light will flash and enter the set up mode.

2. Turn on the WIFI of your computer, search for the SSID named "WHE-TX", connect to it, and the password is 12345678. After connecting, open the browser and enter 192.168.2.1 and press Enter, the account name and password are both admin, and then log in .
2-1.png
3. Go to the "System" interface, click "Choose File", select the "WHETX-V1.1.2.dat" file on your computer, and then click the "Update" button.
3-1.png
4.Then the device will update and wait for the progress bar to complete. Note that during the upgrade process, please do not disconnect the power supply of the device. If the power is cut off accidentally, it may cause the device to malfunction.
4-1.png
5.After the upgrade is complete, it will pop up a window to prompt you to reboot the device, click "OK". Then click the "Reboot" button on the web page, after rebooting, you have completed the WHE-10TX upgrade. Then please upgrade your WHE-10RX.
5-1.png
5-2.png
How to update WHE-10RX from WHE10RX-V1.1.2 to WHE10RX-V1.1.3
1.Use Micro USB to power up your WHE-10RX, wait 15 seconds for it to fully start up, then press and hold the set button for 3 seconds, the yellow light flashes to enter the set up mode.

2. Turn on the WIFI of your computer, search for the SSID named "WHE-10 RX", connect to it, and the password is 12345678. After connecting, open the browser and enter 192.168.2.2 and press Enter, the account name and password are both admin, and then log in.
e2-1.png
3.Go to the "System" interface, click "Choose File", select the "WHE10RX-V1.1.3.dat" file on your computer, and then click the "Update" button.
e3-1.png
4.Then the device will update and wait for the progress bar to complete. Note that during the upgrade process, please do not disconnect the power supply of the device. If the power is cut off accidentally, it may cause the device to malfunction.
e4-1.png
5.After the upgrade is complete, it will pop up a window to prompt you to restart the device, click "OK". Then click the "Reboot" button on the web page, after rebooting your device will complete the upgrade of WHE10RX-V1.1.3, and then you need to upgrade to WHE10RX-V1.1.4.
e5-1.png
e5-2.png
How to update WHE-10RX from WHE10RX-V1.1.3 to WHE10RX-V1.1.4
1.Same as before, you need to log in to the webpage, select "WHE10RX-V1.1.4.dat", and then upgrade.
s1-1.png
2. Wait for the progress bar to complete. Note that during the upgrade process, please do not disconnect the power supply of the device. If the power is cut off accidentally, it may cause the device to malfunction.
s2-1.png
3.After the upgrade is complete, it will pop up a window to prompt you to restart the device, click "OK". Then click the "Reboot" button on the web page, after rebooting, you have completed the upgrade of WHE10RX-V1.1.4 and you can experience the new functions.
s3-1.png
s3-2.png
You do not have the required permissions to view the files attached to this post.

Post Reply