Reminder

Welcome to the DDMALL forum.

You are currently viewing our boards as a guest which gives you limited access to post questions and access to our other features.
Only registered members may post questions, download the updated firmwares and documents.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

Function introduction of cv-f01-tx and cv-f01-rx

DDMALL Fiber Optic Extenders enable long haul transmission of AV and RS-232 control signals at extreme distances.
Post Reply
Erik
Posts: 8
Joined: Thu Nov 28, 2019 9:16 am

Function introduction of cv-f01-tx and cv-f01-rx

Post by Erik » Fri Jan 10, 2020 10:32 am

1、Function introduction of cv-f01-tx
①It can be used HD-F01-RX/CV-F01-RX/SDI-F01-RX to realize optical transmitter conversation of different signal types.
②Signal mode signal core LC interface optical signal remote output.
③Video and audio can be embedded to realize optical signal output.
④Support two CVBS+ two 3.5mm earjack audio interface connection andaccess.
⑤Support two split screen or full screen video conversation to optical signal output.
⑥Support NTSC and PAL video input.
⑦Scaling function, user-defined output mode and resolution ratio, maximum support 1600 × 900 output.
⑧Support any video signal plus any audio embedded for optical signal output transmission.
⑨Support OSD settings management function.
2、Function introduction of cv-f01-rx
①It can be used HD-F01-TX/CV-F01-TX/SDI-F01-TX to realize optical transmitter conversation of different signal types.
②Signal mode signal core LC interface optical signal remote input.
③To video and audio can be deintercalated signal output.
④Realize long-distance optical signal conversion to CVBS, 3.5mm earjack audio interface output at the same time.
⑤Support NTSC and pal video output.
⑥Support serial port to set image saturation, brightness and contrast.

Post Reply